My "passion" on this has nothing to do with marine applications,
where cooling is really, really, really easy, as you say. It
comes
from having been down this path before (yes, for aviation
applications), and I'm just trying to give you the benefit of my
experience. I will NOT say that you shouldn't try things... the
only
opinion that matters in all this is that demonstrated by the
ENGINE!
So, despite how I might come across, I heartily encourage you to
try
stuff and share the results... But I would use a great deal of
caution in drawing conclusions without the benefit of sufficient
testing.
The fact that Ken used Evans PG for 1100 hours without cooling
problems is very encouraging. PG has similar characteristics as a
cooling fluid to pure EG.
Paul Lamar
"Weinstock, Rob" wrote:
The last time I plowed through the Evans website, I discovered
that PG
is much more viscous than water. The implication is that the
standard
water pump probably won't be sufficient, and indeed there are
"heavy
duty" water pumps sold on the Evans website for common engines,
e.g.,
Chevy small block. The other consideration is that the power
required to
drive the pump will be greater, too.
I would think that if this stuff were so great, it would popular
with
say, diesel truck fleet owners. But, it isn't, yet.
Regards,
Rob--
In working with liquid cooled rockets, the only thing that was
demonstrated
better than water was hydrogen. With water you can extract heat at
up to
about 20 BTUs per square inch second (that is second - 1/60th 0f a
minute)
That is way higher than you could possibly ever use, With about
6000F
and 3000psi on the shuttle engine they are pulling about 90
BTU/inch
squared second at the sonic throat.
Vance
Actually I only ran the Evans cooling for about 400 hrs and the rest
of the time I used Sierra.
Another benefit to the higher viscosity is that it will keep the
bearing from going out in the event of a water leak into the oil, at
least that is the word from the people in the diesel world.
Ken
John wrote:
Gentlemen,
I've been following this "string" because of an interest in liquid
cooling
although not in a rotary (some day I hope).
Anyway, there was a statement recently that PG is much more viscous
than water BUT is it more viscous than EG? I'm presently running PG and
water at a 50/50 mix. If PG isn't any more viscous than EG then there
shouldn't be any need to upgrade the water pump?
Regards,
John K. Lewis
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/
Copyright 1998-2003 All world wide rights reserved.