A> I was in the dealer ship for the 7,000 mile RX8 service and I checked
A> on
A> the cost of the manual TX bell housing suitable for a Don Dunbar style
A> PSRU. $604 so the junk yards will be about $300 if you can get
A> them to sell you just the bell housing. I imagine they would
A> like you to buy the whole TX for more.

A> Can you bring your bell housing in for less than $600 US George?

A> Paul Lamar

The bell housing I have used is not of the RX8 but RX7 1986-1991.
The later models will fit as you can see from the photos I posted of
the Renesis with the bell housing mounted.

--
Best regards,
 Don                            mailto:ddunbar@echidna.id.au

The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.