Subject: 4Rotor - Part 1 of 4
From: ACRE
Date: 2/14/2004, 8:27 AM


 Erik Duley wrote:


Hi Paul

I saw this N/A 4 rotor powered RX7 on the cover of a
magazine (March
2004 - New Zealand Performance Car) here in NZ and had to
buy it.
I scanned in the article and here it is - Enjoy :-)

The rest of the parts follow this one.

Regards, Erik



 Unfortunately those picts are way too large to publish so I
 had to do
 some severe cropping. This is about the best I can do. Thanks
 Erik
 for sending them. Perhaps if someone is really interested you
 can send
 them direct. It would be a nice Reno racer engine if it holds
 up
 for 15 minutes at full power. Since the e-shaft is more or
 less a copy
 of the Mazda four rotor shaft I see no reason why not.

 Paul Lamar


Eric,

I would be very interested in the whole story! So if you don't
mind, please
send me a copy of the works - text, photos, scans, whatever you
have on this
one (and others, should you generally be in the scanning
bussiness!!)

Thanks,
Thomas Jakits
rijakits@cwpanama.net


Eric I suggest you use OCR on the text as the original scans
were
very hard to read. In that case we can publish the text.

Paul Lamar


Here are a couple of things I noticed about the engine.

BTW see if you can read the small text on the left of this
picture.

Paul Lamar

Harley wrote:

Mornin', Paul...

see if you can read the small text on the left of this picture<<

If you mean that very small, almost invisible partial column of text
along the left edge of the picture, it's almost readable.  I can
make out the letter A, I think the word drive, but a lot of similar
letters, such as "o", "e" and "a" are indistinguishable.

The resolution is not quite high enough to make it clear enough to
be sure of the text, and coupled with the loss due to saving it in
jpg format, the compression blended too many pixels to read it
all..

On the other hand, the  resolution and  compression are fine for the
intended purpose ... highly detailed view of the engine!

Harley-- 

BTW Harley how many miles do you have on the RX8? Any problems?

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.