"Brian D. Cain" wrote:

I'm not familiar with this place, and I don't think I've ever seen
it, but has anyone
done a rotary engine in one of these before?  A friend of mine is
wanting to know.

Thanks!

B
__________________
Brian D. Cain -/- Grand Prairie, TX -/- bdc196@killspam.comcast.net
bdc@killspam.teamfc3s.org
BDC Motorsports - Performance Rx-7 13B Rebuilds, EFI tuning, etc.
MSN bdc196@killspam.hotmail.com, Yahoo! bdc196, AOL Symajhi, ICQ#
1733105
http://bdc.cyberosity.com -/-
http://groups.yahoo.com/group/HaltechSupport

Yes we have had a couple fly. Unfortunately at least one of the guys
gave up after a few in-flight fires due to a defective after market
oil cooler. Not a Mazda oil cooler.

Paul Lamar

Tony Babb wrote:

There's at least one Velocity SE-RG flying, owned by Kerry Woods and at
least another half dozen (not all are RG models) under construction. One
site to check is http://www.lonestarvelocity.com/, Chris Barber is the
builder. There is an unofficial Velocity builders list with powerplant info
at  http://www.lehightechnology.com/velocity/owners.asp?

Dave do you have this flying one on your list?
http://members.aol.com/rotaryroster/index.html?f=fs

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.