Would it be easier just to cast in all the metal for the various
designs and cut/machine out what is not needed, instead of having to
weld metal back in and incur the possibility of having to heat-treat
the casting?

Scott Gettings

******************************************************************************

Scott, Guys;

I've carefully checked, and see that I have the room to cast a breaker wall adjacent
(Parallel) to the original MM mounting Pads on the Bellhousing that can be
easily and safely removed for weight savings purposes by those using the
standard side mounts.......This means all you need to do is saw and sand the
ends......No welding of end plates.

Butch

 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.