from Cliff,

You probably allready know this; Dave Algie made a gear
case and drive that's pretty nifty. He used carbon fiber for the
case. You'er probably too far along to consider something like that
now. I thought I'd just put it out there. Just in case his web site
is algie composite aircraft.e-mail addr aca@iquest.net

What is that web site address again? This is very interesting.

Paul Lamar

Mr Robert Geis wrote:

Note: forwarded message attached..

Found this Paul

http://members.iquest.net/~aca/

Bob Geis

Thanks.

Maybe this guy can build a carbon fiber bell housings for us.
I think I will send him email and ask.

Paul Lamar

Hi, Paul....did you see the carbon fiber prop on his website?  Just thinking
about the prop you were involved with a while back, and looking for blades?
PaulConner

Yes but judging by some of the statements he makes on his web site I
would be
a bit wary of his engineering abilities. If he made a bell housing for
us it
would be to Butch's drawings.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.