Mark Steitle wrote:
Paul,
The recent article on the custom built 4-rotor talks about an auxilary oil
pump fitted to the metering pump pad. I was curious if it would be
beneficial to use the metering pump pad to mount a separate psru pump,
along with a separate oil reservoir. This would allow the use of gear lube
vs. engine oil in the psru. While this would add weight and complexity, it
seems that if it would extend the life of the psru considerably it might be
worth it. I would appreciate your thoughts on this.
Mark S.
I think that is a good idea. I am a bit skeptical if the drive has
enough
torque capacity to drive a high pressure engine oil pump however.
The gears are kind of small. Here is a small oil pump I made out
of pinion stock.
Paul Lamar
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/
Copyright 1998-2003 All world wide rights reserved.