Just like the old Mini Coopers, sharing gear box oil with the
engine can lead
to misery.
A friend tried to drive an engine oil pump with the distributor
drive, and
the distributor gear dissolved before the session was over. (Steel
gear on a
steel gear) This when we all thought that 75 PSI was a bunch of
pressure.
The gear box should have it's own oil supply and it should be
cooled. The
lube should be 100% synthetic and there should be a spray nozzle
to direct cooled
oil at the junction with the highest wear.
In my opinion.
A problem in the gear box should not be allowed to become an
engine problem.
The pump can be very small and should be a stand alone run from
the pulley
end. If the oil output is relatively unrestricted, there will be
little power
absorbed.
Lynn E. Hanover
What is the possibility of driving an Aux oil pump for the PSRU,
from the ring gear? Its close to the PSRU. Of course this might
mean a slight redesign of the Bell housing. Just a thought, base on
very little knowledge of the power and torque required to turn such
a device. Tom Webber
I might work but you would need a really big gear unless you wanted
a zillion RPM on your PSRU oil pump :) The apex oil metering pump
drive is
almost ideal.
Paul Lamar
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/
Copyright 1998-2003 All world wide rights reserved.