I don't know. I know nothing about it. It sounds illegal as the
guys
doing the work in Canada wont tell Peter anything about it
indicates
they are not the owners. Other wise there is no reason not to
tell
Peter all about it.
"Illegal" is a little strong.
The company is in the business of doing primarily Lancairs. They
have 3 in their shop. In one they have installed a LOM turbine
for an Italian client. They also market a glass cockpit setup.
This one is owned by someone in Arizona perhaps. I have heard
some negative rumours about the company. They do admit to not
having expertise on the Mazda and will have to locate it.
The company name is Endevour Aerospace.
Peter
Might not be illegal in Canada but it is illegal in the US to
hire somebody to build your experimental airplane that you
are supposed to build yourself. The question is; what do they
tell customs when it moves back and fourth across the border?
Paul Lamar
Christopher Barber wrote:
Paul,
Not trying to be contrary, but is was my understanding it was ok to hire
others to build your project IF you were not trying to get the certificate
to do your own maintenace and annuals. Did I miss somthing?
Now, that being said, I can't imagine why you would not want to build you
own project.....I am loving the build and the education. Also, I relish
the
idea of being able to do my own maintenace, not that I intend to be the
only
person to review it. I have nothing against a trusted A&P's input. Of,
course, this is just one mans opinion, I could be wrong.(yes, blantanly
stolen from Dennis Miller) FWIW.
All the best,
Chris
www.LoneStarVelocity.com
Christophe Barber
Attorney & Counselor at Law
Barber & Pi, LLP
Houston, Texas
Serving the Needs of Senior Texas
281-464-LAWS (5297)
www.TexasAttorney.net <http://www.TexasAttorney.net>
CBarber@TexasAttorney.net <mailto:CBarber@TexasAttorney.net>
I suppose that is true. I think it all depends on when the money
changes
hands. I know you can buy a flying registered experimental airplane
from
someone that built it and then have it professionally maintained by
a FAA certified A&P and annuls signed off by an I.A.. I think!
Buying a kit and then paying somebody to build it I suspect is
definitely against the rules. Then there is the gray area where the
airplane is almost ready to fly and a certain amount of the work must
be done by the guy that finally gets it registered.
Then you have the situation where one buys a registered experimental
flying airplane and makes major changes.
The whole situation sounds out of control to me.
Your the lawyer :)
Paul Lamar
I'm certainly not an atty., but according to AC 20-27F, an aircraft is not
eligible for certification as an amateur-built aircraft unless you have
built the majority of the plane yourself, including if you "hire someone to
build it for you". See
http://www.airweb.faa.gov/Regulatory_and_Guidance_Library/rgAdvisoryCircular
.nsf/1ab39b4ed563b08985256a35006d56af/0ca2845e2aafffbb86256dbf00640cb2/$FILE
/AC20-27F.pdf
However, you can buy a partially-built a/c and use the documentation to
support the FAA granting certification for a plane you finish. This is an
interesting problem, because I personally know a number of homebuilts that
have received their FAA sign-off and were almost completely built by third
parties for hire. So there is some wiggle room there.
I'm pretty sure that most FAA examiners would not sign off a new homebuilt
when someone in another country built it and shipped it in! Maybe they are
planning to have it completed and get it certified in Canada first???
Scott Gettings
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/
Copyright 1998-2003 All world wide rights reserved.