Subject: turbo 20b in Lancair
From: ACRE
Date: 2/19/2004, 2:54 PM


Any wants to see some pictures of this installation can take a
look at:

http://www.pipcom.com/~cowcam/mazdathreerotor.htm

Would this be a Powersport or Marcotte PSRU.

The engine appears to be mated to the four  bed mounts of a stock
motor mount for Continental or?

I couldn't find out who did the work so far on the installation.
Aircraft is from maybe Arizona. Anyone heard of it before?
Peter


Mark Steitle wrote:

Paul,
Does this project belong to anyone on the ACRE?

Mark S.

I don't know. I know nothing about it. It sounds illegal as the guys
doing the work in Canada wont tell Peter anything about it indicates
they are not the owners. Other wise there is no reason not to tell
Peter all about it.

Paul Lamar

I also find it interesting that Tedd James and Dave Atkins are
obviously
keeping quiet about it since it has a Power Sport PSRU with duct tape
over
the logo and an Atkins intake manifold :)

Paul Lamar

Michael wrote:

Here is another Mazda at the same site.  A 13B w/ a truck tranny for the
PSRU.  Goto http://www.pipcom.com/~cowcam/deucepics.html

But of course. That is Peter Cowan's airplane as in the Peter above.
I take it it is for sale Peter? How many hours on it now?
Do you have a larger drawing of the gear box? Hard to read the
dimensions off the web site. The bell housing looks very similar
to the 2nd gen turbo manual transmissions bell housing.

Was this box built prior to George Grahams?
Last question. What is the gear ratio?

Paul Lamar

 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.