Subject: turbo 20b in Lancair
From: ACRE
Date: 2/19/2004, 11:20 PM


 Christopher Barber wrote:

Paul,

Not trying to be contrary, but is was my understanding it was ok to hire
others to build your project IF you were not trying to get the certificate
to do your own maintenace and annuals. Did I miss
somthing?


Yes Christopher, You did miss something. 51% MEANS 51% you may "work" on your own plane with "assistance" at an assembly experts workshop. YOU are supposed to be the one doing the work. They can set you up provide jigs and tools etc...etc. If you have your plane built at a facility when you are not there you are in violation of the rules. The FAA doesn't actively police these rules, and a lot of people take advantage of that fact. I am not as bothered by this as some things, since I have seen many people handling tools in a way that I would NEVER ride in an aircraft they built! The rule is still build it yourself with the shop assistance. Bill Jepson


The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.