Subject: Aux. Oil Pump for PSRU
From: ACRE
Date: 2/20/2004, 10:35 AM


Bulent wrote:

Since we are not talking big GPM need, do you think ordinary electric fuel
pump will do the job? I have a nice 12V gear pump, but it's pumping 3 GPM
and will work at 30-40 psi all day long. For small amounts and the thin auto
transmission fluid, Tracy's fuel pump may do the job?

I think Bulent is on the right track. While a fuel pump may not be the right solution,
I think that *IF* one is going to have a dedicated PSRU lubricant system, an electric
pump looks attractive.  I especially think that actually mounting it on the PSRU
housing is a good start at reducing the number of connections (failure points).

Russell Kent

Any juice to the oil pump is that much less range you will get when
the
alternator goes bye bye. Most of those high pressure pumps suck down
the amps. I would say almost as much as the whole rest of the EFI
system
since there is already one of them keeping the EFI going.

I think it might be practical if your PSRU did not require 3 gallons
per minute
at 45 psi or more as Tracy's does.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.