Subject: Aux. Oil Pump for PSRU
From: ACRE
Date: 2/20/2004, 10:33 AM


 I might work but you would need a really big gear unless you wanted
a zillion RPM on your PSRU oil pump :) The apex oil metering pump
drive is
almost ideal.

Paul Lamar

Joe Hull wrote:

Here is a "full-time" electric pump that puts out 60PSI @ 3GPM.
This might
work?  http://www.infinityaerospace.com/GP302-12_PreOiler.jpg

Thanx
Joe Hull
Cozy MkIV #991 (working on Engine & Cowling)
http://www.maddyhome.com/canardpages/pages/JoeHull/index.html

Don't forget guys if you lose your alternator you've got to run
off the battery until you find a place to land. You don't want
something as mission critical as the oil pressure to the PSRU too
fail as well. The best idea is run it off the metering pump
drive. Running it from the inside of the gear box would
be a major redesign.

Paul Lamar

What kind of volume and pressure is availble from the metering
pump?  T.W.

Not much. I don't know the pressure. At one ounce per gallon of fuel
and ten gallons an hour that is 10 ounces per hour. Something like
the RX8 is probably way less than that.

My guess is Tracy's gear box is going to need several gallons per
minute
and at least 45 psi. As I recall Al measured 15 GPM for the main
3 rotor oil supply.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.