Tracy is already running Mobil 1 in his engine. The problem is the oil
in the engine runs 220 degree F. The gear box does not need to run at
that temp. The life of the gears is sure to be higher if the box is kept
cooler while using oil that is best suited to gears. That means
extreme pressure gear lube synthetic 15W 50 or some such. Also as some one
pointed out a problem in the engine does not need to destroy the gear
box and vice versa.
Paul Lamar
Harrison Young wrote:
You have touched upon a subject that I have wondered about for years.
Specifically, with a multi-viscosity oil such as 10w40, my understanding is
that the oil has the viscosity of straight 10w at low temperatures, and the
viscosity of straight 40w at higher temperatures. My question is whether
this 10w40 oil at higher temperatures has the viscosity of a straight 40w at
that same higher temperature, or of straight 40w at say room temperature.
The point being that straight 40w would be thinner at higher temperatures.
Any comments, or am I all washed up on the subject?
Harrison Young
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/
Copyright 1998-2003 All world wide rights reserved.