Subject: Maybe We Don't Need One... RE: Aux. Oil Pump for PSRU
From: ACRE
Date: 2/20/2004, 12:21 PM


Tracy is already running Mobil 1 in his engine. The problem is
the oil
in the engine runs 220 degree F. The gear box does not need to
run at
that temp. The life of the gears is sure to be higher if the
box is kept
cooler while using oil that is best suited to gears. That means
extreme pressure gear lube synthetic 15W 50 or some such.  Also
as some one
pointed out a problem in the engine does not need to destroy
the gear
box and vice versa.

Paul Lamar


Harrison Young wrote:


You have touched upon a subject that I have wondered about for
years.
Specifically, with a multi-viscosity oil such as 10w40, my
understanding is
that the oil has the viscosity of straight 10w at low
temperatures, and the
viscosity of straight 40w at higher temperatures. My question is
whether
this 10w40 oil at higher temperatures has the viscosity of a
straight 40w at
that same higher temperature, or of straight 40w at say room
temperature.
The point being that straight 40w would be thinner at higher
temperatures.
Any comments, or am I all washed up on the subject?

Harrison Young

Harrison, This is a pretty common misconception. Actually, it's the
other way around. 10W40 will never act thicker than 40W when cold
and never thinner than 10W when it's hot.

Rick Girard

 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.