Subject: Rotary powered NZ gyrocoptor - PSRU
From: ACRE
Date: 2/20/2004, 9:03 AM


MIchelle Wade wrote:


Hi Erik,

You may be interested in our project. We were at the Big Boys Toys
show in Auckland in Nov and at the Tauranga Airshow on Waitangi
weekend.
The Kahu has a 165hp rotary engine. Configuration by designer of
aircraft also.

See our website below which is currently being revamped with new
photos and more video clips.
The tail configuration has changed as in the attached photo.

Cheers
Michelle Wade

www.aero-sport.com & www.adiuvo.net (video clips)

PH +64 9 378 4611 / FAX 4610
PO Box 1464
Shortland Str
Auckland
New Zealand

Erik Duley wrote:

Hi Michelle

Yes I have seen your gyro at Matamata a couple of years ago. What are
the details on your PSRU?

Erik

MIchelle Wade wrote:

Hi Erik,

I've spoken with Chris our designer and he advises the following
brief rundown on our development in this area to date:

At the outset we utilised a Mazda tansmission to provide a PSRU which
was highly successful but with a weight penalty.
We now utilise a Hirth gearbox for ease of being able to purchase a
range of gear ratios. The disadvantage with this particular box is
that it is not continuous rated for the hp that we are using it at.
The gearset by calculus is more than adequate but the bearings would
need to be increased in capacity for continuous use.

However our production models (date for production not yet set and
investor dependant)
of this engine capacity will have geared tooth belt drives, of our own
design,
giving us no loss in hp transmission and no lubrication requirements and

a further weight saving and the ability to easily change reduction
ratios.

Michelle Wade
www.aero-sport.com & www.adiuvo.net (video clips)

 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.