Christopher Barber wrote:
Paul,
Not trying to be contrary, but is was my understanding it was ok
to
hire
others to build your project IF you were not trying to get the
certificate
to do your own maintenace and annuals. Did I miss
somthing?
Yes Christopher, You did miss something. 51% MEANS 51% you may "work"
on
your own plane with "assistance" at an assembly experts workshop. YOU
are
supposed to be the one doing the work. They can set you up provide jigs
and
tools etc...etc. If you have your plane built at a facility when you are
not
there you are in violation of the rules. The FAA doesn't actively police
these rules, and a lot of people take advantage of that fact. I am not
as
bothered by this as some things, since I have seen many people handling
tools in a way that I would NEVER ride in an aircraft they built! The
rule
is still build it yourself with the shop assistance. Bill Jepson
Christopher Barber wrote:
Thanks for the clarification. I can't imagine not building myself
though...it really is fun....as long as I keep SWMBO happy.
All the best,
Chris
Christopher Barber
Attorney & Counselor at Law
Barber & Pi, LLP
Houston, Texas
Serving the Needs of Senior Texans
281-464-LAWS (5297)
www.TexasAttorney.net <http://www.TexasAttorney.net>
CBarber@TexasAttorney.net <mailto:CBarber@TexasAttorney.net>
I recently read in the Sport Aviation magazine that a high school class
built an experimental aircraft as a project. (probably took a few
years/semesters). The students did the work, but since only one person can
obtain the repairman's certificate, it went to the teacher, although he
didn't do the work....only supervised. I guess there are a lot of gray
areas....I agree with one of the preceding posts that it's what you can
convince the DAR and FAA that counts.
A few other people have gotten their repairman's certificate after they
bought a flying aircraft, then took pictures of it completely disassembled,
then they made major changes to it, ie larger/different engine, new
avionics,new wiring and fuel system, new paint and upholstery, and
re-qualified under the 51 percent rule and obtained a repairman's
certificate for that aircraft because they convinced the FAA that they did
at least 51 percent of the work the second time around. Possibly it depends
on how friendly the FAA inspector you approach is, and how he interprets the
regulations? For what it's worth. Paul Conner, SQ2000....built it all,
should get my repairman's certificate on this one.
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/
Copyright 1998-2003 All world wide rights reserved.