Ron Freier wrote:
It's not illegal to hire out any work that you want as long as you can
convince the FAA inspector that you did 51% of the work on the entire
aircraft.
Oh boy. This gets hashed over in rec.aviation.homebuilt periodically.
Here's my understanding of the rules for the USA (YMMV):
1. It's all up to the IA, DAR, and FSDO. Get them on your side.
2. The airworthiness certificate(*) reads "Experimental: Amateur-built".
The rules say that the aircraft must be built primarily for the purposes of
recreation or education. There's nothing in the rules that say you have to
build any of the aircraft yourself (but see #1). If you can convince the
FSDO that the construction of the aircraft met the spirit and letter of the
"recreation or education" rule, the aircraft can get an Ex-Am airworthiness
certificate regardless of how much of the aircraft you actually built.
3. Anyone can work on any part of any aircraft at any time (exception:
radios & some instruments). Aircraft with a Standard or Utility
airworthiness certificate must have all work signed off by a certificated
mechanic (A&P). Some work may require an inspection by a holder of an
inspection authorization (IA). Some work may require approval (form 337) by
the FSDO. Aircraft with an Ex-Am airworthiness certificate can be returned
to service with a log book entry by the person doing the work. Certain
types of changes may require an additional fly-off period as specified by
the AC operating limitations or the FSDO.
4. Aircraft with an Ex-Am airworthiness certificate must pass an annual
condition inspection (analogous to an "annual inspection" for Standard or
Utility certificated aircraft). The condition inspection can be performed
by any holder of an inspection authorization (IA) *OR* by the *ONE* holder
of the repairman's certificate for *THAT* aircraft (if one has been
issued). Not all Ex-Am aircraft have been issued repairman's certificates.
5. One person may apply for the repairman's certificate for an Ex-Am
aircraft. If issued, the RC applies *ONLY* to that aircraft. In order to
apply, the applicant must demonstrate to the FSDO that they performed 51% OF
THE TASKS required to build the aircraft. For example, if building the ribs
is one of the tasks, you can build *ONE* rib and get credit for THAT task.
No one cares if the other 99 ribs are built by a subcontractor. What the
FAA is trying to insure is that the holder of the RC stands a reasonable
chance of being able to actually inspect and repair the aircraft in a manner
consistent with the techniques used in its original construction.
Hope this clarifies things a bit.
Russell Kent
(*) Yes, Ex-Am aircraft have airworthiness certificates. There is some
confusion on this point. The thing that they *DON'T* have (which Standard
and Utility aircraft *DO* have) is a Type Certificate.
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/
Copyright 1998-2003 All world wide rights reserved.