Subject: turbo 20b in Lancair
From: ACRE
Date: 2/20/2004, 1:09 PM


4. Aircraft with an Ex-Am airworthiness certificate must pass an
annual condition inspection (analogous to an "annual inspection" for
Standard or Utility certificated aircraft).  The condition
inspection can be performed by any holder of an inspection
authorization (IA) *OR* by the *ONE* holder of the repairman's
certificate for *THAT* aircraft (if one has been issued).  Not all
Ex-Am aircraft have been issued repairman's certificates.

5. One person may apply for the repairman's certificate for an Ex-Am
aircraft.  If issued, the RC applies *ONLY* to that aircraft.  In
order to apply, the applicant must demonstrate to the FSDO that they
performed 51% OF THE TASKS required to build the aircraft.  For
example, if building the ribs is one of the tasks, you can build
*ONE* rib and get credit for THAT task. No one cares if the other 99
ribs are built by a subcontractor.  What the FAA is trying to insure
is that the holder of the RC stands a reasonable chance of being
able to actually inspect and repair the aircraft in a manner
consistent with the techniques used in its original construction.

Hope this clarifies things a bit.

Russell Kent

(*) Yes, Ex-Am aircraft have airworthiness certificates.  There is
some confusion on this point.  The thing that they *DON'T* have
(which Standard and Utility aircraft *DO* have) is a Type
Certificate.

Ron Freier wrote:

It's not illegal to hire out any work that you want as long as you
can convince the FAA inspector that you did 51% of the work on the
entire aircraft.

Oh boy.  This gets hashed over in rec.aviation.homebuilt
periodically. Here's my understanding of the rules for the USA
(YMMV):

1. It's all up to the IA, DAR, and FSDO.  Get them on your side.

2. The airworthiness certificate(*) reads "Experimental:
Amateur-built". The rules say that the aircraft must be built
primarily for the purposes of recreation or education.  There's
nothing in the rules that say you have to build any of the aircraft
yourself (but see #1).  If you can convince the FSDO that the
construction of the aircraft met the spirit and letter of
the"recreation or education" rule, the aircraft can get an Ex-Am
airworthiness certificate regardless of how much of the aircraft you
actually built.

3. Anyone can work on any part of any aircraft at any time
(exception: radios & some instruments).  Aircraft with a Standard or
Utility airworthiness certificate must have all work signed off by a
certificated mechanic (A&P).  Some work may require an inspection by
a holder of an inspection authorization (IA).  Some work may require
approval (form 337) by the FSDO.  Aircraft with an Ex-Am
airworthiness certificate can be returned to service with a log book
entry by the person doing the work.  Certain types of changes may
require an additional fly-off period as specified by the AC
operating limitations or the FSDO.

One further point on this.  The log book entry return to service only
applies to later Operating Limitations.  For example, my airplane was
last issued Operating Limitations in 1989.  Item 3 says "Any major
change to this aircraft, as defined by FAR 21.93 invalidates the Special
Airworthiness Certificate issued for this aircraft."  If I had been a
little smarter, I would have had the previous owner update to the newer
Operating Limitations before I purchased it.  Then I could have used the
log book entry and prescribed fly off time.  As it is, I will have to
start from the beginning to get a new Special Airworthiness Certificate.
When it is issued, it will have the newer Operating Limitations.

I haven't built one bit of the airplane except for the rotary engine
installation.  I cannot get the repairmans certificate on this plane
because it has already been issued (as well as not qualifying under the
rules).

Bob White

http://www.bob-white.com
N93BD - Rotary Powered BD-4


 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.