Subject: turbo 20b in Lancair
From: ACRE
Date: 2/20/2004, 8:43 PM


Bob White wrote:

One further point on this.  The log book entry return to service
only
applies to later Operating Limitations.  For example, my airplane
was
last issued Operating Limitations in 1989.  Item 3 says "Any major
change to this aircraft, as defined by FAR 21.93 invalidates the
Special
Airworthiness Certificate issued for this aircraft."  If I had been
a
little smarter, I would have had the previous owner update to the
newer
Operating Limitations before I purchased it.  Then I could have used
the
log book entry and prescribed fly off time.  As it is, I will have
to
start from the beginning to get a new Special Airworthiness
Certificate.
When it is issued, it will have the newer Operating Limitations.

Ah yes.  I had forgotten about the change in the standard operating
limitations boilerplate that happened a few years ago. Thanks for
pointing
that wrinkle out.

Bob, check with the local FSDO office. IIRC, there's a procedure for
getting
the operating limitations updated to the new boilerplate without alot of
fuss.

Russell Kent

Barnhart wrote:

Between building a slow build kit, doing the engine overhaul, a bunch of
stuff done twice, I must be at least at %200.........

My tech counselor knows exactly what I am and not doing.  Goes with his job.

Barny
MGDQ x2 20bt

 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.