Subject: Air Worthiness Certificates Was: Re: turbo 20b in Lancair
From: ACRE
Date: 2/23/2004, 11:40 AM


Bob White wrote:

I've checked [on the updated operating limitations boilerplate].  It's easy
to do if you haven't already started a major mod, like pulling the lycoming
engine out and putting a rotary on it. Once the mod is started, the
airworthiness certificate is cancelled.

*OUCH*  I suppose it goes without saying that you wished you'd done more
planning ahead in that regard...

I suppose one could have just not mentioned it, but it dosen't seem the best
policy. :)

Oh, don't *EVEN* think that way.  Statistically speaking, the most likely time
in GA aircraft's life for something Bad to happen is immediately after
maintenance.  A major mod is major maintenance...  A paperwork problem at that
point could be Very Bad News (think "certificate action", "insurance claim
denied", "personal liability", ...)

The only downside is that I will be "required" to spend more hours flying in
the local area.  I was planning on a complete test sequence even without the
requirements.

Always a good plan.  So when you get the new AC it will already have the newer
boilerplate.

Good luck!

Russell Kent

The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.