Subject: Exhaust manifold and pipe
From: ACRE
Date: 2/26/2004, 7:27 PM


Just wanted to thank everyone for their valuable input regarding the
use
of
the stock cast iron exhaust manifold and a short pipe extension for
my
SQ2000 canard pusher.  I installed it yesterday.  Today I finished
wiring up
my MicroTech ECU.  I just need to install the fuel return line from
the
fuel
pressure regulator to the sump tank, and she's ready to make some
noise.
I
ordered the stainless steel wrapped hose. As soon as that arrives, I
should
find out how loud this thing is. Here is a picture of the exhaust
installation, and yes, I will install the heat shields.  Thanks
again to
all
who responded and contributed to this exhaust installation. Paul
Conner


Paul C., Where did you puchase those welded on AN fittings for your
cooling
system? Thanks. Bill Hyde


Hi, Bill...I purchased them from our local speed shop. I believe Summit
Racing has them also. Try a search for Summit Racing, and I think that once
you are on the Summit page, they have their own search engine for their
catalog. If you can't find them, let me know, and I will see if my local
shop has any more.  Paul Conner

 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.