Subject: Exhaust manifold and pipe
From: ACRE
Date: 2/27/2004, 7:23 PM


First of all nice job - I would be particularly interested in how the
MicroTech ECU works for you as they are made in Australia and have a
good
name and are relatively cheap compared to imports, however I am
completely
ignorant on ECU's.
I do wonder how you lean MicroTech in flight and would love to discuss
the
pro and cons off-site so as not to jam up the newsletter - could you
contact
me at lendich@hypermax.net.au.

I am also very interested on how well the 2 into 4  intake manifold
works as
I have been told the 4 into 4 are only needed at the much higher RPM's.
I will go the two 2 into 4 if they work well enough.

George (down under)


Hi George
Use the up arrow to get to 'Mix Trim' then the + or- to adjust mixture % up
or down. The Data page  shows  mix ratio if you have an EGO sensor. It is
also possible to use the Cruise function.
Ian (also down under.)

 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.