Mark Supinski wrote:
Hi Paul-
We recently acquired a Mazda Turbo II engine to rebuild for use in our Mustang II kit plane.
The engine we have was imported directly from Japan -- not as part of car, but as a used engine pulled from a vehicle
in Japan. We are unsure of what year it truly is -- ie, is it really a turbo-II (since the date ranges for US
turbo-IIs might be different than the ranges in Japan). Can you identify it from the pictures? Is there someplace on
the engine we can find serial numbers? All we can find is 13B on the rotor housings.
FYI, we'll be fully rebuilding based on the Bruce Turrentine video we got a few weeks back.
Regards,
Mark Supinski & Mark Precious
It is definitely a 2nd gen Turbo II but I cannot say whether it is an 88 or a 90
with the turbo heat shield on there. There is a critical difference
as the 87's 88's cracked with regularity while the 89's 90's 91's were more robust.
BIG difference in used prices.
If you take the heat shield off and take a close up picture of the turbo
I can tell you which it is.
Paul Lamar
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/
Copyright 1998-2003 All world wide rights reserved.