As far as the fittings on the radiator, when I ordered the radiator
     > from C&R Racing, I asked for male -16AN fittings and they were all welded in
     > when I received my radiator.  Hope this helps.  Paul Conner

I went with a C&R radiator with male AN16 fittings, the radiator core is 23 1/2" x 18" x ~2", for a whopping 846 cu.
in. core volume. The radiator is a two pass.  Curious to see if the AN  16 fittings are sufficient, but my feeling is
that even if the flow is restricted a bit by the fitting size, it's more than compensated by the large core volume. So
please let us know how goes the cooling on your setup. Thanks.

Brian Trubee
13Brew/RV-4

 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.