Subject: Water plumbing tubing bends
From: ACRE
Date: 3/15/2004, 6:03 PM

Called Burns Stainless today for some 1.5 inch OD .065 wall tubing
bends to use on the dyno engine and they were out of stock for
two weeks. Anybody know were I can buy some 90 degree 3" center line
radius 1.5 inch OD .065 wall tubing bends?

These are for the dyno engine water plumbing only as I will use
my flow meter and it must be mounted vertically.

For the flight engine I had this idea to make the stock water
pump more aircraft friendly and lower profile to fit under those
cowls. I will weld on to the water pump
a 110 degree 3 inch radius .125 wall tube that looks like this.

I will have to have them bent up as Burns does not sell .125 wall. 
I am afraid .065 wall will crack in this application. It will also 
fit the RX8 engine with a simple flange welded on. 

Does this sound like something anybody else would be interested in. 
If not what are your plumbing requirements? 

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.