Hi all,
Paul, does the book mention, that it actually wasn't Felix Wankel who
came
up with the final design?
Actually Felix was pretty angry when he found out!
He said something like: Now you made a workhorse out of my
thoroughbred!
The then NSU-boss would counter: "I wish we had at least the workhorse
already!"
Today's design was developed by NSU Dipl.-Ing. H.D. Paschke in
absolute
secrecy!
The amazing thing about is the layout - the same as today's Renesis
(side
intake and exhaust!)
see: http://www.der-wankelmotor.de/Techniklexikon/techniklexikon.html
...all the way at the bottom
Unfortunately the side exhaust wasn't any good for the "edge sealing
plate"
and so the exhaust was changed to peripheral. The edge sealing plate
was
also changed for the now common side seals. Unfortunately they never
tried
the side exhaust again - until today's Renesis.
You can see Felix's desing here:
http://www.der-wankelmotor.de/Wankelmotor/wankelmotor.html
and here:
http://www.der-wankelmotor.de/Techniklexikon/DKM_vs_KKM/
dkm_vs_kkm.html
You can translate most of it with:
http://world.altavista.com/?kg=XX&il=en
(AltaVista - Babelfish translater)
Thomas J.
Two things I remember from Jan Norbye's book on Felix that add 'Insult to
Injury' - literally...
Felix was a civil engineer and spent a lot of the early time building more
efficient pumps to move...sewage.
Then comes WWII...the Reich wanted him to work on the rotary valve sealing
issue so they could build quieter torpedoes. Felix didn't want to play in
the war effort; the guys in boots burned his shop as incentive. He worked
on the torpedo engines... Fast forward to the end of the war. Germany is
liberated, Felix can FINALLY get back to his engine, and the Allies find out
he worked for the Reich and tossed him in jail. Damned if you do, damned if
you don't...
Andy Hecker
Geez Andy where did you read all this? I know he worked on rotary
valves for torpedo V8's and DB aircraft engines. According to the Norbye book he
was a book salesman initially. The Nazi's and the French after the war did put
him in jail for awhile.
It is interesting that the original configuration with the rotating outer
housing ran at up to 25,000 RPM. The spark plugs were in the rotor and impossible
to change without disassembling the whole engine. This alone made it impractical.
Paul Lamar
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/
Copyright 1998-2003 All world wide rights reserved.