Subject: MRE engines and Robinson helicopters
From: ACRE
Date: 3/17/2004, 8:50 AM


Doug,
         I talked to Phil Meng who worked here at NASA Glenn on the
rotary.  He gave me some material on what they did here.  They even
had a
13B in the front of a Cessna Skymaster.  There are some reports
available
on general topics.  The one story that comes to mind is the
Continental in
Voyager might of been a rotary hadn't Continental come forward and
gave
them an O 360.

Joe Berki
Limo EZ
13B

That was a Continental IOL-200 Joe, as in liquid cooled. Check SAE paper
871042
Meng/NASA paper numbers are SAE 841018 and SAE 920303 among others I am
sure.

Paul Lamar


Had TCM a rotary engine development project anytime recently?  I have
totally conflicting information on that.  I know Lycoming did... even
saw their mock-up rotary... but abandoned it in the mid-eighties
(you're not surprised they did when you see the engine).

Francois Badoux

Yes they did. When I picked up my new O-470 at the factory a few years ago
they mentioned a military rotary contract that was just canceled. I think it was
a gen set.

BTW Francois we have a turbo three rotor flying in Prescott AZ home
to Embry-Riddle western flight training facility so if you get out that
way let me know and I will put you in touch with Tom Parkes.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.