paul   my name is paul brannon. lou rubin & i have
been talking to some off the guys on the east

coast

aboat the prop butch diaz has built. we are very
interested in it. they say it has not been ground
tested so it shouldn't be put on a plane. we are
offering to test it. we have an extra motor in the
shop & tracy has an old reduction drive. we are
looking for butches phone # so we can find out if

he

is coming to sun-n-fun and bringing the prop. any

help

would be appreciated.   paul

fpbjr2001@yahoo.com

I'll send this to Butch PRIVATE email.

You need to modify your test stand so it rocks back
and fourth
at a 67 degree per second rate to adequately test a
prop for
gyro bending loads. This can be done by mounting the
test stand
on a trailer and moving the tongue up and down.

Paul Lamar

 thanks for the help. hope we can get something going
on this prop. we are going to need one for our lancair
es in 6months to a year.    thanks again   paul

The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.