Subject: COZY: FW: Certification requiring production
From: ACRE
Date: 3/20/2004, 11:27 AM


MRE-FB wrote:

Hans Conser (and others) sent me the following article:

Page 18 Feb issue of Flying:

"FAA Certifies Auto Engine Conversion

In November the FAA granted type certification to the Thielert Aircraft
Engines (TAE) TAE 125-01 four cylinder aviation diesel engine.  The
model is a diesel automotive engine, made by DaimlerChrysler, which TAE
converts for airplane use by adding a gearbox and other aviation
specific parts.
The certification for the engine, known as the Centurion 1.7, is the
first of its kind for the FAA.  The approval surprised many industry
observers because it entailed producing an engine with parts that the
manufacturer (DaimlerChrysler) would not verify.  But the FAA was
surprisingly willing to work within this restriction and allowed
Thielert to verify, through a combination of component testing, parts
validation, test stand runs, and ongoing testing that the engine, and
the parts that make it up, meet an acceptable level of safety.
To our knowledge, the certification of the engine also entails another
first, the approval of a powerplant with a timer before before
replacement (TBR) limit--1000 hours or 12 years, whichever is
first--with no overhaul allowed.  When the engine reaches one of those
milestones the owner must replace it with a new engine.  The company is
working toward a 2,400 hour TBR, and will pro-rate replacement engines
from the beginning at the 2400 hour figure.
Thielert plans to offer an STC for retrofit installations of the engine
in Cessna Skyhawks.  Diamond is developing its Twin-Star light twin
around the Centurion 1.7 engine, and OMF is working on a diesel version
of its two-place Symphony."

XXX

Thanks for the head-up Hans.  I followed Thielert's certification
efforts quite closely.  Precisely 2 years ago, the FAA Boston office in
charge of Reciprocating Engines (they will have to change their
department name when we start the certification process!  :) ) told me
that no way they would certify an engine which does not enjoy FULL
TRACEABILITY of all its parts "all the way to the mine". I see that they
changed their mind a bit, which is not a bad thing.  But if you divide
the price of a Thielert engine by its TOTAL authorized lifetime, the
horsepower becomes a bloody expensive commodity.  Unless there are some
further developments, we plan to take the "old-fashioned" road and have
a full aviation certification with no footnotes or caveats!  Even if our
engines' initial purchase price won't be precisely cheap, their lifetime
cost per horsepower will be a fraction of Thielert's (even if they get
2400 hr TBR)... or L's or C's for that matter.... and we plan to offer a
"power by the hour" all-inclusive plan for CERTIFIED engines.  These
plans work great with turbine engines and give the aircraft operator
optimal peace of mind and budgeting ability.

BTW, our 190hp model is 30-40 lb LIGHTER than the 135hp Thielert, and
considerably more compact...

Best regards,

Francois Badoux


Yes of course. It is a rotary after all :)

Paul Lamar

thxs, great information.

Larry A Capps
Naperville, IL

The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.