Subject: Mazda rotary engine factory tour
From: ACRE
Date: 3/22/2004, 1:50 PM


Yeah, right!
You are just hurting to get your fingers on a Japanese RX-8!!
Guys, no cure for that!
Thomas J.

As far as I know the RX8 in Japan is exactly like the one I have here.

Paul Lamar

Except for the wheel on the "wrong" side!

You know they put traffic offenders into Correctional Training


Facilities?


You end up saying "Sir" at the end of every sentence! :))

Thomas J.

They have wheels on both sides just like the US model. The next thing
you are going to tell me is the women have.................... :)

Paul Lamar

Yeah paul, right!

First I was talking about the Steering Wheel

and then

you are obviously already put in charge to find out all kind of things while
in Land of the rising sun,
so why don't you charge the batteries a bit more and bring photographic
evidence of WHAT the women have.....!

Thomas J.  :)

Russell Kent wrote:

Paul Lamar claimed:

As far as I know the RX8 in Japan is exactly like the one I have here.

... if you overlook these "minor" differences in the Japanese version:
1. Steering column on the righthand side
2. Gauge cluster on the righthand side of the dash
3. Gauge cluster indicates km/hr and deg C
4. Accelerator, brake, and clutch on the righthand side of the floorboard
...
:-)

Russell Kent

Paul...

 >>3. Gauge cluster indicates km/hr and deg C<<

So does ours...just push the little button at the upper left of the
tach...the one at the right selects and/or resets the odometers, the one
on the left changes everything to metric...or back.  Comes in real handy
up here when driving into Canada...drove over the border last week, and
used it.

Harley

 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.