I just discovered that a Ford injector will physically interchange
with a Mazda/Nippon Denso and Lucas injectors if you remove the little plastic
tip on the nozzle end. The fuel rail will have to be different however.
Ford injectors are much lower cost than Nippon Denso.
They can also be had in higher flows as I recall.

Paul Lamar

Paul,
That's exactly what I used on my 3-rotor.  Bought a set of 8 of the 42lb/hr
units from
ebay for about the price of having my old ones cleaned.  The 42lb/hr flow
is very
close to the 460cc rating that Mazda uses in the n/a 13B's.

Mark

8 injectors?   Why 8?  Doesn't the 20B need 3 (or 6)?
[no signature]

 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.