I am not sure how you would replace those nylon tubes. Perhaps AN-2 hose if you can find
it. You would probably need a special tool to swage metal
collars over the tubing
joints. Perhaps brazed steel brake line tubing.
Paul Lamar

Paul and group,
You can replace the oil lines with earls flexible
brake lines. They have -3 all the time and -2 is
available on special order. Yes this is 100x
overkill but you can build them yourself for less
than the cost of the stock molded lines. You can
also check the motorcycle shops for prebuilt brake
lines using banjo fitting on the ends they will bolt
right on. The liner is teflon which handles the
underhood temps well. They were designed for
brakes after all!
Bill Jepson

 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.