I can't tell the difference yet
     > between a Dragonfly and a Q200. I think a couple other guys flew

in from

     > there, maybe in an RV. Don't know their names.

Perry, The difference between a Dragonfly and Q 200 is that the original

Q 200 is the one with the main wheels at the ends of the canard. The
Dragonfly has

the Trike gear. Both are based on the same airframe. Unfortunately both

are a bit small for 13B's We need Diamond to produce the Midwest/Norton two
rotor!

Bill

-

Bill, just for the record.. and to furthure confuse the issue. The Dragon
fly Mrk I had the wheels at the tips of the Canard as well. Then out came
the Mrk II which had hoop style conventional gear. After that they followed
w/ the Mrk III which is the trike style gear you see today.

Just so its not so easy to tell between the two..  I think if there was one
of each, side by each like, I'd be able to tell... but not by just walking
up and looking at one or the other.

Jarrett Johnson

The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.