Subject: 13B Turbo II mount for Mustang II
From: ACRE
Date: 3/27/2004, 10:32 AM


Hello Jerry-

I'm told you have produced 13B motor mounts for the Mustang II in the
past.  Is this correct?

We are looking for a supplier for our Mustang II project.  We'd
appreciate pricing & lead time info, if this is something you can
provide.  Photos of prior MII mount(s) would be great -- since we're
installing a turbo, any mount we get must not cause conflicts.  A
Shertz-beam type of design would be great.

Regards,

Mark Supinski & Mark Precious


-Hi Mark,   I have a fixture which can be adapted to any aircraft.   I
have never built an engine mount for the Mustang II and I have never
built a Shertz beam.   All my rotary engine mounts thus far have
utilized the motor mount plate.  I am interested in building a Shertz
beam and will be corresponding with Paul about that later today.  In
fact I will cc this to him.   If he will supply a drawing of the
Shertz beam Mustang II engine mount,  I will build it.

  Are the engine mount attach points on the firewall already in place?
If so,  you will have to supply a template so I can match them exactly.
  If they are not yet in place, it would be prudent to  hold off until
you have the engine mount in hand.

   Jerry

J-Wind Designs
TIG and Machine
Light Fabrication
260-799-4507

Ok Jerry Here it is.

Bill did a an extensive job of engineering on this.
The spread sheets shows different ways of making it.

Paul Lamar

 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.














7200 weight 25.5

T-Section b t tw d area Centroid Moment-I


z stress #/ft beam wt end weight total

2.5 0.5 0.5 1 1.75 0.46 0.27


1.04 27763 2.06 4.38 0.61 4.99

2.5 0.25 0.25 2 1.13 0.63 0.52


1.63 22436 1.32 2.81 0.61 3.43

2.5 0.5 0.25 2 1.75 0.61 0.75


1.89 18153 2.06 4.38 0.61 4.99

2 0.5 0.25 2 1.5 0.67 0.71


1.83 18635 1.76 3.75 0.61 4.36

2.5 0.5 0.5 2 2.25 0.81 1.23


1.69 9939 2.65 5.63 0.61 6.24
















0.00
















0.00
Channel b t tw d area centroid moment-I







0.00

2.5 0.5 0.5 0.5 1.75 0.39 0.13


0.61 34764 2.06 4.38 0.61 4.99

2.5 0.5 0.25 1 1.75 0.46 0.27


1.04 27763 2.06 4.38 0.61 4.99

2.5 0.5 0.13 2 1.75 0.61 0.75


1.89 18153 2.06 4.38 0.61 4.99

2.5 0.25 0.13 2 1.13 0.63 0.52


1.63 22436 1.32 2.81 0.61 3.43

2.5 0.5 0.13 1.5 1.63 0.48 0.38


1.52 28425 1.91 4.06 0.61 4.68

3 0.25 0.25 1.5 1.5 0.56 0.43


1.19 19808 1.76 3.75 0.61 4.36

2.5 0.13 0.13 1.5 0.69 0.51 0.18


1.12 43980 0.81 1.72 0.61 2.33
















0.00
Rectang b d b1 d1 area centroid moment side wall top/bottom





0.00

2.5 2 2.25 1.75 1.06 1 0.66 0.13 0.13
1 10880 1.25 2.66 1.35 4.00

2 2 1.75 1.75 0.94 1 0.55 0.13 0.13
1 13049 1.10 2.34 1.35 3.69

2 2 1.5 1.5 1.75 1 0.91 0.25 0.25
1 7899 2.06 4.38 1.35 5.72

2.5 2 2.25 1.75 1.06 1 0.66 0.13 0.13
1 10880 1.25 2.66 1.35 4.00
Wicks 2 1 1.75 0.75 0.69 0.5 0.11 0.13 0.13 6061-T6 0.5 34239 0.81 1.72 1.35 3.07

2 3 1.75 2.75 1.19 1.5 1.47 0.13 0.13 6053-T5 1.5 7361 1.40 2.97 1.35 4.32

2.5 2.5 2.25 2.25 1.19 1.25 1.12 0.13 0.13
1.25 8040 1.40 2.97 1.35 4.32

2 1.5 1.75 1.25 0.81 0.75 0.28 0.13 0.13 6053-T5 0.75 19448 0.96 2.03 1.35 3.38

1 2 0.87 1.87 0.37 1 0.19 0.07 0.07 4130 1 37388 1.27 2.69 1.35 4.04

2 1 1.87 0.87 0.37 0.5 0.06 0.07 0.07 4130 0.5 56206 1.27 2.69 0.76 3.45

0.25 1 0.12 0.87 0.15 0.5 0.01 0.07 0.07 4130 0.5 252662 0.49 1.05 1.35 2.40

















Tube R Ri

Area Centroid Moment Wall Thick








1 0.88

0.74 1 0.33 0.13

1 22153 0.87



1 0.75

1.37 1 0.54 0.25

1 13410 1.62



1.25 1.13

0.93 1.25 0.66 0.13

1.25 13648 1.10



1.25 1

1.77 1.25 1.13 0.25

1.25 7950 2.08



1 0.88

0.71 1 0.31 0.12

1 22901 2.41



1.25 1.19

0.5 1.25 0.37 0.07

1.25 24404 1.69




































Aluminum 1.18 #/in2/ft













steel 3.4 #/in2/ft