Subject: Deta couple plate aluminum steel end housings.
From: ACRE
Date: 3/28/2004, 9:39 PM


Ken Welter wrote:

  Have you ever looked into Deta couple plate ?

   It is steel on one side and aluminum on the other side and is used
in boat and ship building to connect an aluminum cabin to a steel
hull.
  They weld a strip of this to the deck and then weld an aluminum cabin to it.

  They make the plate by laying an aluminum plate on top of a steel
plate and then packing explosives on top of it and then take a cat
and bury it with dirt and light it off and they end up with one plate.

  It may be what we need for end housings.

   Ken

Yes I vagely remember that process.

Detacouple explosion-bonded structural transition joints (consisting of 5086 or
5456 alloy aluminum bonded to ASTM 516, Grade 60 steel with an 1100 aluminum interlayer).

The two metals are connected by a Detacouple, which is an aluminum/steel strip that is explosively clad together, much like how our dimes and quarters are
made.  Detacouple was invented by DuPont at least 30 years ago, and is now made by Dynamic Materials Corporation.

http://www.dynamicmaterials.com/

Explosion Metalworking

Dynamic Materials Corporation has three explosion clad manufacturing divisions; two are located in Europe and one in North America.

Explosive Fabricators, Inc. (EFI) was the name preceding the corporate name change to Dynamic Materials Corporation (DMC) in 1995. EFI and the two European
companies were original licensees of DuPont who is the original developer and patent holder of the explosion welding process. In 1996 DMC purchased the metal
cladding business of DuPont, the Detaclad® division.

 A time line graphic "DMC Arrow" illustrates the consolidation of the metal cladding businesses by DMC. A brief description of each of the clad manufacturing
divisions follows.
DMC Clad Metal Division - North America
This division manufactures in a new factory located south of Pittsburgh, Pennsylvania, USA. It is the largest capacity, most integrated and efficient clad
producing facility in the world. The sales office is located in the corporate headquarters in Boulder, Colorado, USA.

DMC Clad Metal Division produces the complete range of clad products and serves many industries including: chemical processing, oil refineries, primary metals
production, power generation, pulp and paper, shipbuilding and industrial air conditioner manufacturing. The major product is flat, bi-metallic explosion clad
plate. Many other, value added products such as electrical and structural transition joints are also produced. The division is certified to ISO 9002. Much more
detail on the industries served and products as well as the manufacturing process for explosion welded clad is provided further in this website.


Nobelclad - France
Nobelclad was started in 1968 and licensed the Detaclad® from DuPont. The manufacturing plant and sales office are located in Rivesaltes in the south of France.
The business was sold to DMC by SNPE, France in 2002. SNPE is DMC?s major shareholder.

The factory is a large, well-equipped plant serving all of the same industries as the North American business. Additionally, Nobelclad has been an industry
leader in research and development of the art and science of explosion welding, referred to as ?cladding.?  The division is certified to ISO 9002 and AD-W0 in
accordance with TÜV.

NitroMetall - Sweden
Nitro Metall was started in Sweden in 1967, also as a licensee of DuPont Detaclad Division. The manufacturing site was originally in Nora and now is near
Likenas. The sales office continues in Nora. The division is certified to ISO 9002 and AD-W8 in accordance with TÜV.

More info.
Preparation: The first step of the cladding operation is the preparation of the two surfaces that are to be bonded together. These surfaces are ground or
polished to achieve a uniform surface finish with a roughness Ra of 3 µm (140 RMS) or below, dependent upon the metals combination and thicknesses.

Assembly: The cladding plate is positioned parallel to and above the base plate, at a standoff distance which has been predetermined for the specific metals
combination being bonded. This distance is selected to assure that the cladding plate collides with the base plate after accelerating to a specific collision
velocity. The standoff distance typically varies from 0.5 to 4 times the cladder sheet thickness dependent upon the choice of impact parameters as described
below. The limited tolerance in collision velocity results in a similar tolerance control of the standoff distance.
 
The standoff distance is controlled by support spacers at the plate edges and internally as needed. Internal standoff devices are designed to be consumed by the
jet, which is discussed below.

An explosive containment frame is placed around the edges of the cladding metal plate. The height of the frame is set to contain a specific amount of explosive
providing a specific energy release per unit area.

Bonding Operation : The explosive composition and type is selected to yield a specific energy release and a specific detonation rate (the speed at which the
detonation front travels across the explosive layer). The detonation rate must be subsonic to the acoustic velocities of the metals.

The explosive, which is generally granular, is uniformly distributed on the cladding plate surface filling the containment frame. It is ignited at a
predetermined point on the plate surface using a high velocity explosive booster. The detonation travels away from the initiation point and across the plate
surface at the specified detonation rate. The gas expansion of the explosive detonation accelerates the cladding plate across the standoff gap resulting in an
angular collision at the specified collision velocity. The resultant impact creates very high-localized pressures at the collision point.

These pressures travel away from the collision point at the acoustic velocity of the metals. Since the collision is moving forward at a subsonic rate, pressures
are created at the immediately approaching adjacent surfaces, which are sufficient to spall a thin layer of metal from each surface and eject it away in a jet.
The surface contaminants, oxides and impurities are stripped away in the jet. At the collision point, the newly created clean metal surfaces impact at high
pressures of several GPa (Figure 2). Although there is much heat generated in the explosive detonation, there is no time for heat transfer to the metals. The
result is an ideal metal-metal bond without melting or diffusion.

Impact parameters: The proper impact parameters for a specific metal combination are dependent upon the metal types, thicknesses, and mechanical properties.
Selection of the proper parameters is critical to assure a strong, high quality, ductile bond. The impact conditions are associated by the equation:

 
http://www.dynamicmaterials.com/clad/docs/HTML/nobelclad_technical_bulletin_nt200.htm

Sounds like the steel wear surface can be very thin. Perhaps on the order of .010 inches.
This should cut both the cost of the process and the weight of the end housing.

Paul Lamar 

The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.