Subject: Gasoline vs Jet a vs diesel fuel: the international picture
From: ACRE
Date: 3/28/2004, 1:07 AM


Francois Badoux wrote:

You are correct on both accounts, Paul.

I hope I'm not going to bore you guys too much with a little
information on the international aviation fuel situation (by
international, I mean non-US +
Canada).  But I'll take the risk:

In a former thread I volunteered a little study I made of worldwide
100LL and Jet-A prices.  Some people were a bit disoriented because
it was a study dating
back to late 2002, a time when oil prices were substantially lower
than nowadays.  But the bottom line is that, outside North-America,
there is a 1.5:1 to
10:1 price ratio between those 2 fuels... per liter (or gallon for
that matter)... notwithstanding the higher calorific content of jet
fuel per volume unit.
So, the day a couple of attractive, certified jet-fueled engine lines
will hit the market, I don't bet much money on the future of gasoline
aviation engines
outside North America.  And if you have, let's say, 50% of the
international market, it's as good as having 20-25% of the US
market... not a bad target to go
after, don't you agree?

Now, what about diesel fuel?  Well, you know better than I do that
airports offering mogas are few and far between.  Airports offering
diesel are even fewer.
In these countries, the only real fuel alternative is jet-fuel... and
the good news is that a) it's cheap, everywhere, b) it's available,
everywhere and will
stay so as long as airliners don't fly on hydrogen (see another
recent discussion thread), and  c) it's safer than gasoline.  I'd be
interested to hear the
point of view of US and Canadian pilots on the matter.


Then, to my knowledge, there are only 3 engine technologies that can
or could potentially use jet-fuel:  turbines, compression-ignition
engines (diesels) and
rotary engines.  I won't elaborate on the first to concentrate on the
latter two.  Diesels, or rather turbo-diesels have 2 great
advantages:  they already
work on jet-fuel with few modifications (but read on) and they have
great BSFC.  But, as Paul has outlined above, they have a number of
very significant
drawbacks in aviation applications.  Furthermore, as the ignition of
diesels cannot be actively timed, they rely on their fuel's fixed
KETANE RATING (the
equivalent of octane rating in gasoline) to insure that the mixture
ignites consistently at a given compression ratio.  Ketane rating is
therefore a strongly
controlled parameter in diesel fuel.  However, as turbines are
constant ignition engines, jet-fuel's ketane rating is NOT controlled
and can vary widely from
one country to the other, one refinery to the other and even one
batch of fuel to the other.  While ketane rating in jet-fuel is
relatively uniform in North
America and in Europe (around 65 if my memory serves me well), it can
be widely different in some other parts of the world (I was told it
is around 25 in most
South American countries).  Therefore, if you fly in, let's say
Brazil with a turbo-diesel powered aircraft with an engine made for
the US market, you may
never fly out!  I never tried, but I have this information from the
head technical guy at AeroShell UK.

Conclusion:  The answer is SPARK-IGNITED jet-fueled engines.  And,
IMHO, there is only one presently available engine technology that
fills the bill:
rotaries.  Now, Dr Wankel's and Mazda's technology has to be
substantially modified to run on Jet A well enough to achieve
aviation certification, but with
modern technology it's possible... and I think well worth the
challenge!

Fly safe!

Francois Badoux


Another advantage to developing a jet fueled spark ignited rotary is
that it creates the possibility of selling engines to a very big
customer that is commited to 100% "heavy fuels", this potential
customer being the US military of course.

Hans

The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.