Edward Klepeis wrote:
Dear Paul
Here are the pic I said I would send you.
Regards
ED
This is what a proper fish tail muffler should look like.
Wonderful job Ed. Are you going to bring it to S&F so we can display it
in the rotary tent?
Paul Lamar
ERuttan wrote:
This seems like a better shape for use with cooling augmentation using
the exhaust.
Would this be better than a common round shape?
I think so but cooling ejectors are highly configuration sensitive.
2715. Acker, Loren W Kleinknecht, Kenneth S , ***Flight comparison of
performance and cooling characteristics of exhaust-ejector
installation with exhaust-collector-ring installation ,
<http://naca.larc.nasa.gov/reports/1947/naca-rm-e6l13a/>* NACA
RM-E6L13a , February 14, 1947 , pp. 37 .
This is the best for the fish tail configuration.
2259. Manganiello, Eugene J Bogatsky, Donald , ***An experimental
investigation of rectangular exhaust-gas ejectors applicable for
engine cooling ,
<http://naca.larc.nasa.gov/reports/1945/naca-report-818/>* NACA
Report 818 , 1945 , pp. 19 .
We have this one. Not very relavent.
4694. Fred D. Kochendorfer and Morris D. Rousso, ***Performance
characteristics of aircraft cooling ejectors having short
cylindrical shrouds,
<http://naca.larc.nasa.gov/reports/1951/naca-rm-e51e01/>* NACA RM
E51E01, May 1951, pp. 41.
4760. Ellis, C. W., Hollister, D. P. and Sargent, A. F., Jr.,
***Preliminary investigation of cooling-air ejector performance at
pressure ratios from 1 to 10 ,
<http://naca.larc.nasa.gov/reports/1951/naca-rm-e51h21/>* NACA
Research Memorandum E51H21, 1951, pp. 23.
Paul Lamar
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/
Copyright 1998-2003 All world wide rights reserved.