Subject: New name for Mecanair
From: ACRE
Date: 3/30/2004, 9:19 PM


Hi, Paul....I was doing an internet search this evening to see if
there was
anything pertaining to the new Mistral / old Mecanair rotary engine,
so I
typed in Mistral rotary.  I was directed to
http://www.tip.ge.com/vacuum.htm
Seems they use a Mistral 400rotary van exhauster/compressor to suck
up
sewage and sludge.  Maybe Raven isn't such a bad a name.     Hope to
see you
at Sun-N-Fun.  Paul Conner

Always a good idea to plug your proposed name  into google :)

Paul Lamar

Thanks for the head-up, I am very flattered that you take our future
so
seriously.  We know there are compressors, clutches and bicycles by
the
name of Mistral in the USA, as well as electric hair dryers and flat
irons in Canada.  Our trademark attorney does not think that there is
a
conflict with these products as ours are in a different class.

BTW, ground testing of our engine on the Arrow started last Saturday
in
Daytona Beach.  It's going on without any major hitch.  First flight
is
planned for the coming weekend.  I'll keep you posted.

Francois Badoux
MISTRAL Engines LLC

Congratulations.

If I were not going to Japan on Sunday I would pop down to Fl early to
witness
this historical event. Sounds wonderful. Getting prestigious Embray
Riddle
University involved was a stroke of genius on your part Francois.
I don't suppose you can fly off the FAA required 40 hours and fly it
over
to Sun & Fun Lakeland airport could you? That would make a great display

near the Embray Riddle tent.  Perhaps the local FAA FSDO will grant a
one
time exemption to the 40 hour rule.

Lacking that you could recruit ten students to take the wings off and
flat bed truck it over.

Paul Lamar

------

Thanks Paul.  I'll send you pictures and hopefully a video of the first
flight.  You'll be the first one to know outside the Mistral team...
well... that is if you can check your emails in Japan!  You should see
that Arrow's big 3-bladed prop spinning so slowly at idle you would
almost think you could walk through the blades!  ... that reminds me
that I have to put a sticker somewhere on the plane with the disclaimer:
walking through the blades of a moving prop can be dangerous to your
health!  :)

The fact to have Embry-Riddle as an official partner has opened many
doors in the US aviation industry that a small start-up company from
Switzerland would never have opened.  We have already arranged with the
local FAA office to have a special ferry permit to and from Lakeland
issued to us with fewer than 40 hours if we don't encounter any serious
problem.  There again, the fact that the engine installation is done by
ERAU and that the flight testing will be done by an ERAU professional
flight test pilot has obviously helped tremendously.

Let's be prudent... there are still a zillion things that could
potentially go wrong (although hopefully no big one)... but, yes, we are
doing everything we can to present the Arrow on the flight line at SNF.

Paul, would you be good enough to ask Ray Fiset to get in contact with
me to arrange a few details about this little corner you promised me
under the rotary tent?  BTW, what's the exhibit space number for that
tent?  Where will it be located?  Oh!  One more thing:  what's your
shirt size?

Francois Badoux

Francois A. Badoux, CEO
MISTRAL Engines LLC
1500 Beville Rd, Ste 606314
Daytona Beach, FL 32114-5644
Tel:     (386) 405-6200  (valid starting April 13th 2004)
Fax:    (386) 323-8091
Email:  mre-fb@bluewin.ch-- 

It technically is not an exhibit space. It is across the way from the forum
tents. There are several workshop tents. Welding, woodworking, fabric,
electrical and maybe one or two others. The tents are quite large being
about 30 feet by 30 feet. That is about the size of the rotary engine tent.
When you walk into the show from the parking lot you must first walk by these tents.
I have not heard from Ray. He may already be at Sun & Fun.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.