Subject: New name for Mecanair
From: ACRE
Date: 3/30/2004, 10:07 AM


Hi, Paul....I was doing an internet search this evening to see if
there was
anything pertaining to the new Mistral / old Mecanair rotary engine,
so I
typed in Mistral rotary.  I was directed to
http://www.tip.ge.com/vacuum.htm
Seems they use a Mistral 400rotary van exhauster/compressor to suck up
sewage and sludge.  Maybe Raven isn't such a bad a name.     Hope to
see you
at Sun-N-Fun.  Paul Conner

Always a good idea to plug your proposed name  into google :)

Paul Lamar

Thanks for the head-up, I am very flattered that you take our future so
seriously.  We know there are compressors, clutches and bicycles by the
name of Mistral in the USA, as well as electric hair dryers and flat
irons in Canada.  Our trademark attorney does not think that there is a
conflict with these products as ours are in a different class.

BTW, ground testing of our engine on the Arrow started last Saturday in
Daytona Beach.  It's going on without any major hitch.  First flight is
planned for the coming weekend.  I'll keep you posted.

Francois Badoux
MISTRAL Engines LLC

Congratulations.

If I were not going to Japan on Sunday I would pop down to Fl early to witness
this historical event. Sounds wonderful. Getting prestigious Embray Riddle
University involved was a stroke of genius on your part Francois.
I don't suppose you can fly off the FAA required 40 hours and fly it over
to Sun & Fun Lakeland airport could you? That would make a great display 
near the Embray Riddle tent.  Perhaps the local FAA FSDO will grant a one 
time exemption to the 40 hour rule.

Lacking that you could recruit ten students to take the wings off and 
flat bed truck it over.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.