There  is an alternative, cheaper and easier way to make a shertz
beam- take a look at my engine on the ACRE website- I made a shertz
beam out of a single 4x4x1/2 piece of 6061 angle, cut down to
3x3x1/2. Couldn't be simpler. Lightening holes could also be cut in
it. Materials were about $10 or less. I cut down the aluminum angle
on my table saw with a carbide blade.

Brian Trubee

-Jerry Hey wrote:

Brian,  I looked on the ACRE site for your engine but could not find
it.  What title or heading is it under?   Jerry- 

The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.