Can someone give me the oil temperature coming out of the engine prior
to
cooling?
Thanks.
Del
People usually don't measure it coming out of the engine prior to
cooling as far
as I know. The stock temp sensor is after the cooler.
It depends on a lot of things. Could be up to 300 F. Should be kept as
low as
possible going in. 180 to 190 going in is achievable. Mobil One does not
break down
until about 400 to 500 F.
Paul Lamar
----------
We have bench data on oil temp at various points in the engine and
engine installation. I agree with Paul that it should be as low as
possible going in. But the temperature after the cooler is more a
function of the cooler's efficiency than of the engine's health and
proper tuning. For instance, the oil temperature drops appreciably when
switching from 95-octane mogas to 100LL. While bench testing, we were
mainly watching the oil temperature at the entrance of the radiator and
were cutting power if we saw 140C (284F) and climbing. The problem with
hot oil is not only that it may break down, but also that its viscosity,
and therefore lubricating qualities, decreases with temperature.
Francois Badoux
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/
Copyright 1998-2003 All world wide rights reserved.