Can someone give me the oil temperature coming out of the engine prior to
cooling?
Thanks.
Del
People usually don't measure it coming out of the engine prior to cooling as far
as I know. The stock temp sensor is after the cooler.
It depends on a lot of things. Could be up to 300 F. Should be kept as low as
possible going in. 180 to 190 going in is achievable. Mobil One does not break down
until about 400 to 500 F.
Paul Lamar
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/
Copyright 1998-2003 All world wide rights reserved.