That is all very interesting Francois. Jim Mederer at Racing Beat and Mazda with the
Lemans four rotor both found a slightly BETTER BSFC with the injectors mounted near
the front of the intake tubes. The problem with the Lemans engine with the injectors mounted
near the front of the intake tubes was unacceptable throttle response. You are correct. We are concerned with in-flight fires. We have had several.
BTW just to confuse the issue here is a picture I took at Geneva of a Renault Formula 1
engine with the injectors mounted outside the bell :)
Paul Lamar
Paul you have me confused again, what do you mean by the 'front' of the tubes? Please say close to the "inlet port"or at the 'inlet to the induction tube' or words
to that effect. From memory, I think that the Le Mans engine also had the injectors mounted outside the bell and squirting into the the bellmouth. It would appear
these problems are related to low airflow, like poor throttle response, vague mixture control, hardly an airplane problem. Not ignoring FIRE, of course. Dave McC
The start of the tubes near the bell's. At the inlet of the tubes.
Paul Lamar
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/
Copyright 1998-2003 All world wide rights reserved.