<< Thanks Lynn for the compliment. Yes, they have precisely the same
geometry as the 13B. However they won't be interchangeable and won't fit on a Mazda
> side-housing as we brought a few modifications of our own, mainly:
>
> - the face-sealing o-ring grooves are on the rotor housings rather than on
the side housings.
>
> - Notice the extra hole in the oil pan support? We have integrated the
external oil gallery that we have on our engines into the short-block casings for
> weight and cost savings... it will also give a neater and more compact
installation.
If the alignment dowels are in the same place, 12A, Cosmo, or early 13B iron
would work. No grooves.
I was in the shop looking at a 12A periphery port housing., (sand cast) It
looks like the chrome is right on the aluminum. Is that possible?
Lynn E. Hanover
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/
Copyright 1998-2003 All world wide rights reserved.