Subject: 13B dynafocal mount - CG issues
From: ACRE
Date: 4/23/2004, 3:36 PM


OK I'll throw mine in.  These are the figures for my currently flying
configuration.
The 2004 Renesis rotary that I'm getting ready to install will weigh
about
22 pounds less.

1989 vintage Mazda 13B rotary
 with water pump & plugs      -    180 lbs

carburetor or fuel injection    -    13.5 lbs   very crude manifold,
throttle body,
injectors, fuel rails, fuel pumps (2)

ignition system                   -     6 lbs  (coil/igniter modules)

spark plugs, ignition harness  -     Plugs included in "long block"
weight

starter                               -     7.5 lbs

alternator with mounting brackets -  9.2 lbs.

prop reduction unit                      -  42 lbs

coolant weight                            -  12.7 lbs (7 qts 50/50 mix)

cooling system (radiators, hoses)    -  15 lbs    (includes oil cooler)

                                      total    -  285.9 lbs

Tracy Crook

"Powell, Ken" wrote:

Here is Tracy's message to the RV list giving his weights:

He is saving weight someplace else. Not the bare block.
Perhaps the coils.


Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.