What do the engineers out there recommend for minimum wall thickness on

1/2"

and 3/4" NPT using 6061-T6 aluminum?

Thanks,

Del Johnson

That is tough because 3/4 NPT is tapered. I would say .125" is marginal.
I would rather see 1/4 inch.

Paul Lamar

Ditto here,
Archie

 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.