Subject: All aluminum rotary
From: ACRE
Date: 4/27/2004, 6:31 AM


Chad Robinson wrote:

How much metal is in each housing? I assume there's a weight benefit here as
well. right?

Regards,
Chad

Cast iron housings weigh roughly 50 pounds each.
Iron has a density of .3 pounds per cubic inch.
Aluminum is .1 pounds per cubic inch. All other things being constant
the aluminum end housing would be one third as heavy or .33 X 50 pounds
or 16.5 pounds each. A 50 pound weight saving over all for a two rotor.
That would reduce the RX8 bare block weight to about 130 pounds from 180
pounds.


Paul Lamar

Douglas Fir wrote:

Hello everyone,

At first glance it seems that if I use all aluminum housings it may be
cheaper to build up my engine from parts then to buy a new 13B (250hp) six
port engine and and start eliminating pieces. Am I correct?

If anyone knows  someone in California who is making or has made a SeaWind
I would like to meet them when I come over from Japan next month.

For a SeaWind Doug I think you will need a 3 rotor. What is the gross weight? 
We have several people on here building SeaWinds with three rotor engines.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.