If you use hose and hose clamps for your cooling plumbing  you
should take a look at this. This silicone rubber hose is about
a dollar a foot at McMaster Carr but it is about the best you can
buy. I also bought some Breeze constant torque heavy duty hose
clamps. This silicone hose is quite soft so a SS liner is needed in the

hose

clamp to prevent the hose from extruding through the worm gear slots.
The constant torque feature means the clamp can expand and contract
slightly as the aluminum hose barb expands and contracts when
it warms up and cools down. The washers are actually Belleville springs
back to back. The Breeze part number is CT-200L.
McMaster Carr part #5281K-17.  I bought a box of ten for about $34.

Well worth it. Not as good as AN but then again it will flow more
coolant with less pressure drop. 1-1/2" or AN -24 is hard to find
and real stiff. AN-20 is only 1-1/4" ID probably adequate but still
stiff. AN -20 also requires a lot of tig welding aluminum.

It does not pay to nickel and dime the coolant plumbing. A coolant

system

failure can bring you down just as fast as a broken crankshaft
if we had crankshafts which we don't. So we don't need to worry about

that :)

Paul Lamar

Good info Paul. That was my plan too. P-51  had the same setup with

aluminum

tubing and short hose sections triple clamped. Double clamped and safety
wired clamps together will do for us, I hope.
Bulent

Joe Hull wrote:

Anyone want to share the expense of an Earl's beader for 1 1/2" aluminum
tube?  I'm using short sections of rubber and clamps too, but I want to bead
the ends of the aluminum tube and can't find anyone in the area with a
beader.

Joe Hull
Cozy MkIV #991 (working on Engine & Cowling & Finishing)
http://www.maddyhome.com/canardpages/pages/JoeHull/index.html

Where are you Joe? If you send your tube to Ed Klepies I think he can do it
for you.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.