Subject: Seawind 2 or 3 rotor?
From: ACRE
Date: 4/28/2004, 8:32 AM


<< Cast iron housings weigh roughly 50 pounds each. >>

Using a bathroom scale, I get:

Front iron              22lbs [23.5]
Center iron            24lbs  {26.5]
Rear iron               26lbs [30]
crank and weights  21lbs
front cover               5lbs
12A rotor                 8lbs
12A rotor                 8lbs
stationary gear front 4lbs
stationary gear rear  6lbs
rotor housing front  10lbs [13.5... 13B]
rotor housing rear   10lbs
water pump            11lbs

13B crank rotors and counter weights are slightly heavier.

I have electronic scales that I will set up and do this again for just the
pieces and I have a completed short block to weigh. I will get pictures of that
being done.

Picture is Richard Sohns one rotor.

Lynn E. Hanover

Opps. I was obviously guessing.

22
24
26
21
5
8
8
4
6
10
10
11
----
155 pounds


That is only 155 pounds total Lynn. The 13B weighs 190 pounds with these parts.
What is missing? The numbers in the boxes above are what I got with
my digital bathroom scale. I am not sure if the iron parts I have are
all 13B. The rotor housings certainly are. The 13B rotors are another
couple of pounds. The steel oil pan is heavy. I don't have one here
to weigh. Tension bolts, oil pump, etc.,etc..


Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.